SmartContact

Your contact person

Mr. Norbert Witteczek
Rötestr. 17, 70197 Stuttgart
Fon: +49 711 / 2 55 21 - 16
Fax: +49 711 / 2 55 21 - 10

Targeted provoking of faults

Specifically for signal, load and fault simulation we offer powerful assemblies based on a relay matrix. With different extension assemblies, this relay matrix can be used for complex environment simulation for control units.

The assemblies are optionally used stand-alone or as integrated components in test system solutions. This way we realise complex four-channel simulation or stimulation systems for stationary or mobile applications. The assemblies are used in different applications for end-of-line tests, fail-safe tests, endurance tests, hard- and software tests.

Relay module 88-channel

The relay matrix TCR2464V2 a total of 88 channels: 64 signal and 24 load channels. Different sensor types can be simulated by on-pluggable modules.

The TCR2464V2 has been developed for use in test systems and automation units. Due to the universal and compact construction, the TCR2464V2 can also be used at the bench for testing and development purposes. With the TCR2464V2 and the expansion modules, a simulation environment for electronic control units can be simulated. Next place the TCR2464V2 as remote-controlled release adapter with fault simulation its application.

  • 64 signal channels to 1 A
  • 24 switch channels to 5 A
  • All channels can be switched at the same time for new test scenarios
  • Each channel can have a ECU pin either on Rails 2 or "free" or to external (real sensor / actuator) switch
  • Both rails have adjustable overcurrent shutdown (0.1A - 2A, 5 A short circuit)
  • Control via CAN
  • Measuring the current and the voltage on the rails
  • Adjustable switch-on
  • 8 slots with 8 channels for optional fitted sensor simulation modules

Number of channels:≤ 90
Size:19"-System
Temperature range:0 ... +50 °C

Operating temperature:0 ... +50 °C
Storage temperature:0 ... +60 °C
Relative humidity:20 ... 65 %
  • Relaisbaugruppe 8-Kanal
  • Sensorsim. PWM 8-Kanal
  • Sensorsim. Spannung 8-Kanal

Relay module 8-channel

The TCR-ShortSIM is an expansion board for fault simulation for the relay matrix TCR2464V2. Through the assembly is a signal, load and Fehlersimualtionsabugruppe from the relay matrix.

  • Eight relay
  • Remote control via CAN
  • Extension module for TCR2464-assembly
  • Switching function Short circuit BAT +, short circuit   BAT, open load

Number of channels:≤ 8
Temperature range:0 ... +50 °C

Operating temperature:0 ... +50 °C
Storage temperature:0 ... +60 °C
Relative humidity:20 ... 65 %

Sensor simulation voltage 8-channel

The TCR USIM is an expansion board for the sensor simulation (voltage) for the relay matrix TCR2464V2. Through the assembly is a signal, load and Fehlersimualtionsabugruppe from the relay matrix.

  • Eight analog sensor simulations for voltages
  • Remote control via CAN
  • extension module for TCR2464-assembly
  • Output voltage 0 .. 5 V, 0 .. 10 V or U bat configurable
  • 16 bit resolution, error typically + /-2LSB
  • Capacity max. 20 mA per channel

Number of channels:≤ 8
Temperature range:0 ... +50 °C
In-/output value:Voltage
In-/output area:0 ... 32 V
Resolution:16 Bit

Operating temperature:0 ... +50 °C
Storage temperature:0 ... +60 °C
Relative humidity:20 ... 65 %

Sensor simulation PWM 8-channel

The TCR PWMSIM is an expansion board for the sensor simulation (PWM) for the relay matrix TCR2464V2. Through the assembly is a signal, load and Fehlersimualtionsabugruppe from the relay matrix.

  • Eight analog sensor simulations for PWM
  • Remote control via CAN
  • Extension module for TCR2464-assembly
  • Frequency range 0.1 Hz to 500 kHz
  • Resolution 0.1% of full scale
  • Duty cycle from 0.1 to 99.9%, permanently on or off
  • Outputs short circuit protection
  • Output level 0 to 5V or Open Collector
  • Output current 10mA, optional up to 2A

Number of channels:≤ 8
Temperature range:0 ... +50 °C
In-/output value:Frequency
In-/output area:≤ 500 kHz
Resolution:12 Bit

Operating temperature:0 ... +50 °C
Storage temperature:0 ... +60 °C
Relative humidity:20 ... 65 %
print