SIMULATING SENSORS AND LOADS

Our simulation modules are used for high-precision sensor simulation, such as wheel speed, lambda probes or encoders. The load modules for resistive, capacitive or inductive original or equivalent loads.

The MCM modules for simulating sensors and loads at a glance ...

Speed ​​simulation

The speed simulation MCM-S08AOI-N serves the independent simulation of static, ramp or analog out speed waveforms. Main area of application is the simulation of Kurbelwellen-/Nockenwellen- or industrial Inkrementgebern. The MCM-S08AOI-N offers this up to 8 parallel digital data tracks, 2 of which Induktivgebersignalverlauf. 

  • Speed sensor simulation unit 
  • Static and dynamic simulation speed, trigger wheel and sensor analog simulation
  • Speed range 30 .. 6000 1/min.
  • 8 data tracks with 7200 points resolution
  • Ramp function with up to 28 nodes
  • Trigger wheel records read back
  • Full remote control
Item Wert
Number of channels: ≤ 8
Size: 19" plug-in-module 100x220 mm
Temperature range: 0 ... +50 °C
In-/output value: Frequency
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: 0 ... +60 °C
Relative humidity: 20 ... 65 %

Power Resistor Decade

High-resolution Power-R-decade with current and voltage measurement. Remote control via CAN.

Signal conditioning functions:
Voltage at the input of the load against ground, load current by current transformers, voltage drop across load resistor, all measuring points brought out for data acquisition, load switch capability to BAT+, BAT-, or OPEN, load switching between two pins (e.g. H-bridge), connected pin switchable against BAT+, BAT-.

Protection functions:
Overcurrent shutdown, overcurrent limit adjustable up to max. 25 A, current overload time adjustable up to max. 500 ms.

  • A high-resolution decadal power resistance channel
  • Resistance range 0.5 Ω ... 800 Ω
  • Resolution 0.1 Ω
  • Accuracy <0.2 Ω +/- 1% of setting
  • Performance range
    • 1 Ω to 6,3Ω: 100 W
    • 6.4 Ω to 25.5 Ω: 50 W
    • 25.6 Ω to 819,2Ω: 15 W
  • Inductive Load 4.7 mH switchable for induction voltage generation
  • Any ext. Last in series connected
  • Remote control via CAN bus
Item Wert
Number of channels: 1
Size: 19" plug-in-module 100x220 mm
In-/output value: Resistance
In-/output area: 0R5 ... 800
Precision: ±0,5 %
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 according to EN 60529

Resistance Simulation 1-channel

The MCM-R01ABI module is designed for precise simulation of resistance values.

It is suitable for example for the simulation of resistive sensors in test systems and assays. For example, for the simulation of temperature sensors, NTC, PCT or other working with resistive characteristic sensors.

  • A high-resolution decadal resistance channel
  • Resistance range via relay switched (galvanically decoupled)
  • Remote control via CAN bus
Item Wert
Number of channels: 1
Size: 19" plug-in-module 100x220 mm
In-/output value: Resistance
In-/output area: 100 R ... 1 M
Precision: ±0,5 % vom nom. Endwert
Resolution: 1 R
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 nach EN 60529