PROCESS INTERFACES

The MCM process modules are interfaces to the MCM modules and provide numerous functions from uninterrupted data recording and transmission to data processing.

The configuration of the process modules also leaves enough reserves for compute-intensive applications and data processing. The use of a realtime Linux kernel also ensures high performance and stability.

In addition, the process modules offer additional bus interfaces to CAN / LVDS / SPI and others in order to operate third-party modules synchronously.

Process Interface ARM 400 MHz

The controller module MCM-Main Control provides the interface between the PC and the MCM system. In a system of this module takes over the management and configuration of the individual MCM-IO modules. The module has an Ethernet interface and a CAN interface.

The MCM-Main Control module is ideally suited as a communication interface for MCM systems.

  • Integrated Real Time IO controller
  • Real-time processing of the measured data
  • PC connection via standard Ethernet LXI about Messtechnikbus
  • Streaming function for smooth online data transfer to PC
  • Bandwidth optimization by setting the sampling rate of each channel MCM modules
  • Master clock generator for synchronization of all I / O channels
  • External Trigger Gateway with wired-OR bus for all I / O channels
  • Configuration master with auto-identification of the I / O modules
  • Integrated measurement memory
Item Wert
Number of channels: 1
Size: 19" plug-in-module 100x100 mm
Isolation voltage: ≤ 800 V
In-/output value: Digital
Data rate: 100 MBit
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 according to EN 60529

Process Interface Zynq Module

The MCM-MainControl V2 module extends the operative range of the system. With the integrated LVDS bus with optimized protocol, the IntelliProbes can be applied in high-speed applications.
By the use of the MainControl module, diverse functions are available. The equipment of the master module with a dual ARM Cortex A9 @ 666MHz as well as user-defined field programmable gate array (FPGA) as sytem on chip (SoC) enables sufficient reserves even for computationally intensive applications and data processing. The use of a realtime Linux kernel ensures high performance and stability. The providing of the SMART MCM process library with integrated LUA script interpreter allows a user-defined data processing, such as alarm events, numerical operations, protocol definitions, triggers, digital I/O.

  • Built-in Real Time IO controller for real-time processing of the measured data
  • Connections for 1 x Ethernet 1000 Mbps, 1x CAN 2.0B, 2x 10 Mbps differential bus connections for data transfer, GPIO, supply. All connections via ODU MINI-SNAP
  • Master module with dual ARM Cortex A9 @ 666 MHz and freely programmable FPGA (SoC - System on Chip), Linux runtime system
  • MCM-Process lbrary with integrated LUA scriptinterpreter
  • Free definition of the output logs to master control system for CAN and Ethernet channels
  • Expansion slots for Mezzanine Boards
  • GPIO: 4x digital IN, 4x digital OUT, 1x trigger IN, 1x trigger OUT

Special Features:

  • Connection to AMS jBEAM for data visualization / logging / post processing
  • Software Suite MCM-Process ControlDesk for configuration / visualization / logging available
Item Wert
Number of channels: 1
Size: 19" plug-in-module 100x100 mm
Isolation voltage: ≤ 800 V
In-/output value: Digital
Data rate: 100 MBit
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 nach EN 60529