Place your trust in the simulation professionals

The MCM stimulation modules are used to generate voltage presets or PWM drive signals.

Our modules for controlling / stimulating at a glance ...

Analog simulation of 8-channel

With the MCM-U08AOS eight voltages can be generated. Depending on the application may be between three output voltage ranges can be selected.

The MCM-U08AOS is ideal for generating voltages with limited output currents in test systems and test systems. Can be simulated with the assembly thus a wide range of analogue sensors in a simple manner.

  • Eight voltage simulation channels
  • Three different output voltage ranges
  • Resolution 16-bit
  • Output current 20 mA per channel
  • Thermal short-circuit current limiting
  • Intrinsically safe output current limiting per channel
  • Remote control via CAN bus
Item Wert
Number of channels: ≤ 8
Size: 19" Einschub 100x100 mm
In-/output value: Spannung
In-/output area: 0 ... 32 V
Precision: ±0,1 %
Resolution: 16 Bit
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 according to EN 60529

Digital I/O 32-channel

The digital I/O module has individually configurable inputs and outputs. The outputs can be used as high-side, low-side or push / pull drivers. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment.

The module is equipped in the best possible for use in harsh environments. Application areas are, among others, test stands, HIL systems and mobile use.

  • 16 inputs and 16 outputs, including 4 PWM outputs
  • Time-synchronous processing of all channels
  • Configurable output driver (high-side, low-side, push / pull)
  • Integrated short-circuit current limitation
  • Adjustable input switching thresholds
  • Galvanic decoupling of channels
Item Wert
Number of channels: ≤ 32
Size: 19" plug-in-module 100x100 mm
Isolation voltage: ≤ 800 V
In-/output value: Digital
In-/output area: 0 ... 32 V
Data rate: < 10 ksps
Resolution: 16 Bit
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 nach EN 60529

PWM measurement 16-channel

With the MCM-U16FII module frequencies, duty cycles and pulse widths can be measured.Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. 

The module is equipped in the best possible for use in harsh environments. Application areas are, among others, test stands, HIL systems and mobile use.

  • 16 PWM measurement channels
  • Frequency range 0.1 Hz to 100 kHz with a resolution of 40 nsec
  • Duty Cycle 3 % to 97 % with a resolution of 0.1 %
  • Adjustable input switching thresholds
  • Galvanic decoupling of channels
Item Wert
Number of channels: ≤ 16
Size: 19" plug-in-module 100x100 mm
Isolation voltage: ≤ 800 V
In-/output value: Frequency
In-/output area: 0 ... 45 V
Data rate: < 10 ksps
Precision: ±0,1 %
Resolution: 16 Bit
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 according to EN 60529

PWM simulation 8-channel

The MCM-U08FOS module is ideal for simulating PWM sensor signals in testing and test systems. Due to the complete independence of all channels even complex duty cycles or frequency conditions can be represented multi-channel high resolution.

  • Eight PWM channels
  • Complex FPGA for signal generation
  • Output selectable 0 ... 5 V or open collector
  • Fixed frequency with variable duty cycle
  • Fixed duty cycle, variable frequency
  • Single pulses with variable pulse duration and pulse repetition
  • Output current 10 mA per channel
  • Outputs short circuit protection
  • Remote control via CAN bus
Item Wert
Number of channels: ≤ 8
Size: 19" plug-in-module 100x100 mm
In-/output value: Frequency
In-/output area: ≤ 500 kHz
Precision: ±0,1 %
Resolution: 16 Bit
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 according to EN 60529

Current sink / source 8-channel

MCM I08ABS module has eight independent channels, which can be operated as a current source or current sink. The channels are individually configurable in this case and have the opportunity to elect to work in current or voltage mode simulation. Two channels in addition have the ability to provide voltages up to 36 V at 100 mA output current, acting as a remote-controlled low-power constant.

The MCM-I08ABS module is ideal for stimulation or stress ECU channels such as in sensor inputs or the sensor supply. She is best equipped for use in harsh environments. Application areas include control device tester, component test benches and HIL systems.

  • Eight configurable current / voltage channels
  • Four channels 0 ... 50 mA current sink
  • Four channels 0 ... 50 mA current source
  • Optional two channels 0 ... 36 V voltage source
  • Optional voltage per channel simulation 0 ... 10 V
  • All channels permanently short-circuit proof up to 24 V
  • All Channels external voltage up to 40 V
  • Settling time with a setpoint step better than 1 ms
  • Control via CAN bus
Item Wert
Size: 19"-System
Isolation voltage: ≤ 800 V
Temperature range: 0 ... +50 °C
In-/output value: Current/Voltage
In-/output area: 0 ... 50 mA / 0 ... 36 V
Bedingung Wert
Operating temperature: 0 ... +50 °C
Storage temperature: -20 ... +70 °C
Relative humidity: 20 ... 85 %
Protection type: IP20 according to EN 60529