The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as more accurate data analysis without the need for a PC. On request, we can supply the complete system in a housing specially tailored to your needs.
CVM with MASTER
CVM systems with MASTER module are mainly used in the field of research & development, in laboratories and test vehicles when high data rates are required. This is the case, for example, when physical effects are to be made visible in a fuel cell stack. The prerequisite is that the corresponding interfaces (EtherCAT, GPIO, LVDS) are available.
Areas of application in detail:
- Marine
- Vehicles
- Stationary systems
- Electrolysers
- Batteries
- Fuel cells
The CVM G5 measuring modules feature an ultra-compact design and a high degree of modularity. Each module has 10 channels. The measurement can take place in the range from -1 to +5 V or from -3 to +3 V.
A CAN only measuring system always consists of a communication module, a termination module and up to 59 measuring modules.
- DC measuring range -1 ... 5 V
- 16 bit resolution
- 1 sp ... 1000 sp / sec
- Galvanic isolation of the measurement channels 1.400 VDC permanent
- 1 out of 10 measurement channels either as AC measurement, measuring range + - 50 mV, 10ksp
- Configurable channel blanking
- Integrated cable break detection
- Extended temperature range for test bed and Automotive Applications