WIRING TECHNOLOGY - it's the connection that counts

Establishing a connection, keeping a connection - what is important for human communication also matters for our technology. We have recognised this and for this reason we have been providing project-specific wire assemblies for our customers for many years.

From single conductor assembly, complex wiring harnesses up to repair and maintenance, we provide our customers with cable assemblies at interesting and fair prices. For this we use modern automated manufacturing technologies and apply the required sensitivity of our specialised employees for the specific job.

Test our connection and talk to our experts!

Adapter for airbag control units

This specimen adaptation airbagcontrol units can be tested using the universal tester. The control units are inserted into a guide rail. By pressing the red lever of the specimen is contacted with the pins of the needle bed adapter.

Diagnostic Tester

Control Unit for Airbag

  • The assignment of test resource occurs in the adapter
  • Quick-change mechanism for Prüflingskontaktierung
  • Conversion time between two specimens max. 30 sec.
  • Expandability
  • Dimensions (WxHxD): 450 x 180 x 400 mm
  • ECUs with ~60 pins
  • Shoring of special loads
  • Contacting the chassis ground via a separate line
  • Testing the buckle detection
  • Check the airbag igniter

Adapter for body controller

This specimen adaptation Body Controller ECUs can be tested using the universal tester. The control units are placed in a specimen receptacle. By pressing the red lever of the specimen is contacted with the pins of the needle bed adapter.

Diagnostic Tester

Control Unit for Bodycontroller

  • The assignment of test resource occurs in the adapter
  • Quick-change mechanism for Prüflingskontaktierung
  • Conversion time between two specimens max. 30 sec.
  • Expandability
  • Dimensions (WxHxD): 450 x 230 x 400 mm
  • ECUs with ~ 130 Pins
  • Shoring of special loads
  • Simulation of motors for sun blinds or vaginal rear wiper
  • Simulation of different headlights as turn signals, fog lights, or brake light

Adapter for engine control units

This specimen adaptation engine control units can be tested using the universal tester. The control units are inserted into a guide rail. By pressing the red lever of the specimen is contacted with the pins of the needle bed adapter.

By the replacement of the short wire harness different variants of a control device can be checked.

Diagnostic Tester

Control Unit for Engine Control

  • The assignment of test resource occurs in the adapter
  • Quick-change mechanism for Prüflingskontaktierung
  • Conversion time between two specimens same type max. 30 sec.
  • Expandability
  • Variability of the adapter by replacing the short wiring harness
  • Dimensions (WxHxD): 450 x 180 x 400 mm
  • ECUs with 58 + 96 pins
  • Shoring of special loads
  • Simulation of sensors eg. lambda probe
  • Simulation of ignition / injection

Adapter for radar and distance control

Mit dieser Prüflingsadaptierung können Steuergeräte für die Radar und Distanzkontrolle (RDU) mit Hilfe des Universaltesters gestestet werden. Die Steuergeräte werden in eine Führungsschiene eingelegt. Durch das Betätigen des roten Hebels wird der Prüfling mit den Stiften des Nadelbettadapters kontaktiert.

Neben dem RDU-Steuergerät können auch Sensoren und Radare getestet werden.

  • The assignment of test resource occurs in the adapter
  • Quick-change mechanism for Prüflingskontaktierung
  • Conversion time between two specimens max. 30 sec.
  • Expandability
  • Dimensions (WxHxD): 450 x 230 x 400 mm
  • ECUs with ~30 pins
  • Shoring of special loads
  • Test of long-range radar
  • Test the adaptive cruise control
  • Test the sensors for parking aid
print